AC Small Geared Motor & Gearhead

Motor with constant speed

Induction Motor

- Constant speed with continuous operation
- Stop in 2 sec. when switched off
- Overrunn: 30-40 times
- Possible for reverse rotation

Reversible Motor

- Suitable for frequent reverse operation
- Stop in 0.5 sec. when switched off
- Overrun: 5-6 times
- Possible for reverse rotation

Brake Motor

- Suitable for operation where load should be maintained
- Stop in 0.2 sec. when switched off
- Overrun: 2-3 times
- Possible for reverse rotation

Clutch & Brake Motor

- Suitable for high frequent start and stop operation
- Stop in 0.1 sec. when switched off
- Overrun: 1 time
- Possible for reverse rotation

2 Pole Motor

- High speed rotation - 3,600 RPM (60Hz) - 3,000 RPM (50Hz) - Used without gearhead - Possible for reverse rotation

Torque Motor

Torque Motor

- Suitable for controlling tension and pushing in winding operations - Possible for reverse rotation

Motor with speed controlling function

Speed Control Induction Motor

- Speed control by using controller
- Stop in 2 sec. when switched off
- Overrun: 30~40 times
- Possible for reverse rotation

Speed Control Reversible Motor

- Suitable for frequent reverse operation
- Stop in 0.5 sec. when switched off
- Overrun: 5~6 times
- Possible for reverse rotation

Speed Control Brake Motor

- Suitable for operation where load should be maintained
- Stop in 0.2 sec. when switched off
- Overrun: 2~3 times
- Possible for reverse rotation

Speed Control Clutch & Brake Motor

- Suitable for high frequent start and stop operation
- Stop in 0.1 sec. when switched off
- Overrun: 1 time
- Possible for reverse rotation

Speed Controller FX1000A

- Front panel potentiometer
- Unit type
(Connecting motor with easy-to-use connector)

Speed Controller DSK

- Front panel potentiometer
- Socket type
(Connecting motor with socket)

Speed Controller DSKS

- Separate potentiometer
- Socket type
(Connecting motor with socket)

Gearhead

Parallel Gearhead

- General Box Type, Powerful Box/Flange Type, High Powerful Box/Flange Type
- Frame Size: 60/70/80/90mm
- Gear Ratio: 2:1 ~ 360:1

Worm Gearhead

- Maximum use of install space
- Worm Solid Type Gearhead
Frame Size: 80/90mm
Gear Ratio: 10:1~60:1
- Worm Hollow Type Gearhead
Frame Size: 90mm
Gear Ratio: 7.5:1~80:1

Inter-decimal Gearhead

- In case of requiring high gear ratio that cannot be generated by single gearhead
- Frame Size: 80/90mm
- Gear Ratio: 10:1