Products Info - AC & DC Small Geared Motor

Products Info - AC & DC Small Geared Motor

Features of DKM AC Small Geared Motors

DKM AC small geared motor was developed first in Korea in 1987 and has been used in a good reputation throughout the whole areas of domestic/overseas industry up to know. Our AC small geared motor having passed the certification such as CE, CCC, ISO etc. is proud of various and wide range of specification which satisfies various electrical requirements from all over the world.

Induction Motor

 

- Constant speed with
  continuous operation
- Stop in 2 sec. when
  switched off
- Overrunn: 30-40 times
- Possible for reverse
  rotation

Reversible Motor

 

- Suitable for frequent
  reverse operation
- Stop in 0.5 sec. when
  switched off
- Overrun: 5-6 times
- Possible for reverse rotation

Electromagnetic
Brake Motor

 

- Suitable for operation
  where load should be
  maintained - Stop in 0.2 sec. when
  switched off
- Overrun: 2-3 times
- Possible for reverse rotation

Clutch & Brake Motor

 

- Suitable for high frequent
  start and stop operation
- Stop in 0.1 sec. when
  switched off
- Overrun: 1 time
- Possible for reverse
  rotation

2 Pole Motor

 

- High speed rotation
- 3,600 RPM (60Hz)
- 3,000 RPM (50Hz)
- Used without gearhead
- Possible for reverse
  rotation

Torque Motor

 

- Suitable for controlling
  tension and pushing in
  winding operations
- Possible for reverse
  rotation

Speed Control Motor

 

- Easy control of motor
  speed
- Line-up: Speed Control
  Induction Motor, Speed
  Control Reversible Motor,
  Speed Control Brake Motor,
  Speed Control
  Clutch&Brake Motor

Speed Controller

 

- Connected to speed control
  motor by extension cable
- FX1000A: Front panel
  potentiometer, Unit type
  (Connecting motor with
  easy-to-use connector)
- DSK: Front panel
  potentiometer, Socket type
  (Connecting motor with
  socket)
- DSKS: Separate
  potentiometer,
  Socket type
  (Connecting motor with
  socket)

 

 

 

 

 

AC Small Geared Motor Line-Up

Features of DKM DC Small Geared Motors - DC motor has a big starting torque and excellent mobility and when comparing with   the same sized AC motor, the output is big and the efficiency is high. - It is easy to control the speed and change the normal/reverse rotation. - Comparing to AC motor, it is available to manufacture low voltage motor which can   be applied to portable machine which uses various spec.,   especially battery power (12V, 24V). - Due to the wear of brush, there is a limit in the service life. - Due to brush and commutator, noise generates when starting. - DSD-90 Speed Controller enables to adjust the speed easily.   (Available to connect to DC 90V motor)

DC Small Geared Motor Line-Up