Product POWNIX

PRODUCT 

 

Korea JCC - PAD & Base Plate - Base Plate

• Base Plate

• 

• 
• 

• Base Plate of V-Chip Aluminum electrolytic Capacitor is used to a general circuit of SMD type, monitor of computer, Hard disk drive, DVD and imformation signal equipment.

• The good durability to heat flame
  The good durability to chemical
  The good electrical property
  High strength, The good durability to abrasion

Use for V-Chip of SMD type

Korea JCC - PAD & Base Plate - Rubber PAD

• Rubber PAD

• 

• 
• 

• Sealing material not to penetrate gas and paste and to fix an element out of movement.

• Less chlorine and high purity
  Excellent electrical insulation and gas impermeability
  Applicable to the temperature range of aluminum electrolytic capacitors
  Long time durability under every required test condition

Korea JCC - Electrode for EDLC - Carbon Coated Electrode

• Carbon Coated Electrode

• 

• 
• 

• Activated carbon powder coated electrode.

• Rated Working Voltage: 2.3V, 2.5V, 2.7V DC
  [Temp. Range]
   1) 2.3V:  -25°C ~ 60°C
   2) 2.5V, 2.7V: -40°C ~  60°C
  Inter resistance: < 4 times of I.M.V(±20℃)
  High power density
  Excellent charge/discharge efficiency

• Carbon electrode for EDLC
  Carbon electrode for hybrid supercapacitor
  Suitable for electric power storage, battery assistance etc.

Korea JCC - Current Collector - Current Collector for EDLC

• Current Collector for EDLC

• 

• 
• 

• The etched foil which has been manufactured as the for Electric Duble Layer Capacitor

• CS series: Al Purity 99.7%↑
  Low ESR
  CS200: Use for Low Power
  CS300: Use for High Power
  Thickness: 20~30㎛

• Current collector for EDLC

Korea JCC - Foil for Electrolytic Capacitor - Formed Cathode Foil

• Formed Cathode Foil

• 

• 
• 

• Foil on which the oxide film has been formed.

• Low / Midium / High Voltage
  CF series: Al Purity 99.4%↑
  CG series: Al Purity 98.0%↑
  Thickness: 20~60㎛
  Use for High Temp. / Long Life
  Low Copper ≤ 3.0㎎/㎡

• Use for audio, ballast, reverse voltage

Korea JCC - Foil for Electrolytic Capacitor - Etched Cathode Foil

• Etched Cathode Foil

• 

• 
• 

• The etched foil which has been manufactured as the for cathodes of electrolytic capacitors.

• Low / Midium / High Voltage
  CF series: Al Purity 99.4%↑
  CG series: Al Purity 98.0%↑
  High Mechanical Strength
  CS series: Al Purity 99.7%↑
  Use for High Temp. / Long Life
  Thickness: 20~60㎛

• Cathode for electrolytic capacitors

Samwha Tecom - EMI Filter - Common & Normal Mode Choke Coil

• Common & Normal Mode Choke Coil

• 

• 
• 

• Condensors on bothe side of Common Mode Filter lower the Differntial Mode Noise, and Condensor on out put side lowers Common mode noise by bypassing the noise to the ground.

• Low loss and high Effectiveness, realized Slim & Small size

• Counter Measure for Switching SMPS EMC of Elctronic Devices

Samwha Tecom - Inductor - Chip Bead & Inductor

• Chip Bead & Inductor

• 

• 
• 

• Chip inductors are good components for impedance matching and frequency noise filtering.

• High Q, stable inductance in wide frequency
  Good reliability (Monolithic structure)
  Magnetically shielded
  Fast mounting speed
  Conform to RoHS

• Computer & Its peripherals
  Hard-disk Drivers
  Audio/ Visual equipment