Temperature Control NX Series

* NX series   - Fuzzy/P.I.D auto tuning   - Heating/Cooling control   - Communication (RS485/422)   - Ramp and Heater Break Alarm(HBA)

	Specification Model NX9 NX7 NX2 NX3 NX4 NX1 Appearance 96(W) x 96(H) x 100(D) 72(W) x 72(H) x 100(D) 48(W) x 96(H) x 100(D) 96(W) x 48(H) x 100(D) 48(W) x 48(H) x 100(D) 48(W) x 24(H) x 100(D) W × H × D (mm) 96 × 96 × 100 72 × 72 × 100 48 × 96 × 100 96 × 48 × 100 48 × 48 × 100 48 × 24 × 100 Function ㆍFuzzy ㆍAuto tuning ㆍExternal contact ---input ㆍHeater Break Alarm ---(HBA1) ㆍInput filtere : OFF, ---1 ~ 120 sec. ㆍZone PID ㆍ2 Alarm outputs ㆍOutput limitation ㆍInterface ---(RS 485/422) ㆍREtransmission ---output (PV, SV, MV) ㆍGroup PID ㆍUniversal-input/ ---output ㆍHeating/Cooling ---control ㆍProtection : IP 65 ---(Front) ㆍHeating/Cooling ---hysteresis Input Thermocouple : K, J, E, T, R, S, B, L, N, U, WRe 5 - 26, PL - Ⅱ R.T.D : Pt 100 Ω, KPt 100 Ω Direct voltage : 1 - 5 V, 0 - 10 V, -10 - 20 mV, 0 - 100 mV (Free scale type) Sampling cycle 250 ms Input display resolution Below decimal point of Input signal and Measuring range Input impedance T.C and mV input : Min, 1 ㏁ d.c V : 1 ㏁ Source tolerable resistance Thermocouple : Max. 250 Ω, Voltage : Max. 2 ㏀ Lead wire tolerable resistance R.T.D : Max. 150 Ω / wire (notice : Identical conductor resistance between 3 wires) Input tolerable voltage ± 10 V (T.C, R.T.D, Voltage : mV d.c), ± 20 V(Voltage : V d.c) Noise removal rate NMRR (Nomal mode) : 40dB min. / CMRR (Common mode) : 120dB min.(50/60 Hz ±1 %) Standard T.C, R.T.D : KS, IEC, DIN Standard junction temp. compensation tolerance ± 1.5 ˚C(15 ~ 35 ˚C), ± 2.0 ˚C(0 ~ 50 ˚C) Burn-out T.C : OFF, Up/Down selectable     R.T.D : OFF, UP selectable (Detection current : 50 nA) Accuracy ±0.5% (Full scale) Power supply for sensor 12 V d.c ( Internal resistance : 600 Ω) Max. 50 mA 15 V d.c (Internal resistance : 600 Ω) Suffix Code Model Code Information NX - Multi input/Output temperature controller Dimension 2 48(W) × 96(H) mm 3 96(W) × 48(H) mm 7 72(W) × 72(H) mm 9 96(W) × 96(H) mm Control type 0 Universal type (heating control) 1 Heating/Cooling control (synchronously) NX9 Option 0 NONE 1 RS485, HBA NX7 Option 0 NONE 1 RS485, HBA 2 SV2, SV3, HBA NX2,3 Option 0 SV2, SV3 1 HBA 2 RS485 Model Code Information NX1- Multi input/Output temperature controller. 48(W) × 24(H) mm Control type 0 Universal type 1 Heation/Cooling control (synchronously) Regular type option Type options Heating output 0 RET Relay 1 none S.S.R/S.C.R 2 RS485/RET Relay 3 RS485 S.S.R/S.C.R 4 ALM S.S.R/S.C.R 5 ALM/RS485 S.S.R/S.C.R Heating / cooling type option 0 none Relay 1 none S.S.R/S.C.R 2 RS485 Relay Cautious) Product NX1-1 is able to select the control output among 6, 9, 10 and 11 outputs Model Code Informationo NX4- Multi input / output temperature controller, 48(W) × 48(H) mm Control type 0 Universal type(heating Control) 1 Heating / cooling control (synchronous control) 1 Heating / cooling control (only for NX4-20) NX4 Option 0 NONE 1 HBA, AL2 2 SV2, SV3 3 RET, RS485 4 RS485, SSR / SCR 5 AL1, AL2 6 AL1, AL2, SV2 7 RS485, HBA Cautious) Option 1: OUT1 (terminal 1-2-3) is applied as AL1 But, only with control output SSR/SCR selection Option 3: OUT2 (terminal 11-12) is applied as RET Option 4: OUT2 (terminal 11-12) is applied as SSR / SCR Option 5: OUT1 (terminal 6-7) is impossible to apply as SV2 Option 6: OUT1 (terminal 6-7) is applied as SV2 but only with relay control output.

Temperature Control PX Series

* PX series   - Fuzzy/P.I.D auto tuning   - Programmable (1pat./10 segs.)   - Heating/cooling control, Heater Break Alarm (HBA)   - Selection among 3 kinds of selected value due to Digital Input

Specification Model PX3 PX2 PX7 PX9 Appearance W 횞 H 횞 D (mm) 96 횞 48 횞 100 48 횞 96 횞 100 72 횞 72 횞 100 96 횞 96 횞 100 Function �냽Input filter: OFF, ---1 ~ 120 sec. �냽External contact input �냽Heating/Cooling control �냽Fuzzy �냽Auto tuning �냽Retransmission output ---(PV, SV, MV) �냽Ramp & Soak �냽Interface (RS 485 / 422) �냽Zone PID �냽3 Alarm outputs �냽Heating/Cooling ---hysteresis �냽Output limitation �냽Protection : IP 65 (Front) �냽Group PID �냽Universal-input/outputs Input Thermocouple : K, J, E, T, R, S, B, L, N, U, WRe 5-26, PL - �뀫 R.T.D : Pt 100 �꽗, KPt 100 �꽗 Direct voltage : 1 - 5 V, -10 ~ 20 mV, 0 ~ 100 mV (Free scale type) Sampling cycle 250mS, ( Remote option : 500mS ) Input display resolution Below decimal point of input signal and Measuring range Input impedance T.C and mV input : Min, 1 �뢾 d.c V : 1 �뢾 Source tolerable resistance Thermocouple : Max. 250 �꽗, Voltage : Max. 2 �? Lead wire tolerable resistance R.T.D : Max. 10 �꽗 /wire (notice : Identical conductor resistance between 3 wires) Input tolerable voltage ± 10 V (T.C, R.T.D, Voltage : mV d.c), ± 20 V (Voltage : V d.c) Noise removal rate NMRR (Normal mode) : 40dB min. CMRR(Common mode) : 120 dB min.(50/60 �럯 ± 1 %) Standard T/C, R.T.D : KS, IEC, DIN Scaling According to setting max. value(SH), min. value (SL) of measuring range, scaling is available (-1999 ~ 9999) Standard junction temp. compensation tolerance ± 1.5 �숦(15 ~ 35 �숦), ± 2.0 �숦(0 ~ 50 �숦) Burn-out T.C : OFF, Up/Down selectable R.T.D : OFF, UP selectable ( Detection current : 50 mA) Accuracy ±0.1% (Full scale) Power supply for sensor 24  V d.c (Internal resistance : 1.2 �?) Max. 50 mA 15 V d.c (Internal resistance : 600 Suffix Code Model Code Information PX - Multi input/output temperature controller Dimension 2 48(W) 횞 96(H) mm 3 96(W) 횞 48(H) mm 7 72(W) 횞 72(H) mm 9 96(W) 횞 96(H) mm Control Type 0 Universal type (possible to select either ther reverse operation direct operation) 1 Heating/cooling control (synchronous control output) Option 0 NONE 1 PX7 : RS485/422M OUT2, REM(Remote input function) PX9 : RS485/422, HBA 2 Contact, REM 2 RS485/422, OUT2, HBA 1 Contact 3 Contact input (D,I), OUT2, HBA 1 Contact Cautions)  1) PX2 and PX3 cannot be applied with any option choices. ---------------2) PX9 can be applied with only option number 1. ---------------3) PX7 can be applied with all of the option choices.